The Effects of Various Parameters on Cr (VI) Adsorption by Raw Rice Husk
Main Article Content
Abstract
The effects of pH, contact time and adsorbent concentration on the adsorption of Cr (VI) onto raw rice husk have been investigated. The parameters - raw rice husk (RRW) particle size which was in the range of 450-600 µm, concentration from 10g/1 to 70g/1, contact time 0.5 to 2.0 hours, and pH 1-8 were tested using 50mg/1 solutions of Cr (VI). The maximum removal efficiency was 66.6% for RRW concentration of 70g/1, at pH 2 and 2 hours contact time. In terms of adsorption capacity, the 10g/1 adsorbent concentration gave the highest reading of 2.2 mg/g for a pH of 2 and 2 hours contact time.
Downloads
Article Details
Licensee MJS, Universiti Malaya, Malaysia. This article is an open-access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).